Head Mounted Temperature Transmitter

Pramp Automation and Calibration

Description

Category: Temperature

Product: Temperature Transmitter

Sub Product: Head Mounted Temperature Transmitter

The PTX-100 is excellent and cost-effective 2-Wire Temperature TRANSMITTER. The design is available in HEAD mounting and DINRAIL housing. The device generates 4-20mA current signal proportional to temperature. The TRANSMITTER operates on loop power supply. The current signal reduces wiring cost drastically. The effect of electrical noise is minimized & long runs of thermocouple wires is eliminated. The housing is shockproof & hermetically sealed.

Model: PTX 100
Isolated transmitters
1000/1500 VRMS isolation
12-36 VDC power supply
True 2-wire transmitter
Ground loop elimination
DIN RAIL Mounting : 75H x 46W x 110D, mm

Input	Pt-100 (2,3wire) R.T.D.
RANGE	-200 to +800 Zero/ span User adjusttable with trimmer potentiometer
Output	4-20mA dc
Accuracy	Better than ±1 %
Ambient Conditions	-20 °C to +80 °C
R.T.D. break Protection	provided, current goes to 34mA if A is open, current goes to 3.6 mAif B or B1 is open
Maximum Load	Maximum loop resistance RL = [ (V+) - 9V ] ÷20mA V+= Loop Power Supply
Reverse Polarity	Protection Provided
Surge Protection	Provided with zener clamp
Housing	1) Head Mounting : DIA (d) - 50 mm, HEIGHT(h) - 27mm 2) DIN RAIL Mounting : 75H x 22W x 92D in mm
Application	Industrial Process Control DCS, SCADA, DATA Driving Recorders, Panel Indicators Factory Automation ACQUISITION Signal to Computers
NOTES	Thermocouple Temperature Transmitter available Humidity - Temperature Transmitter available