2 Way Valve

Size:

15mm (1/2”) to 150 mm (6”).

Pressure Temp. rating :

As per ANSI B 16.5 Cl. 150.

End Connection:

Flanged as per ANSI B 16.5 Cl.150.

Trim:

St. St. AISI 304/316 Ground and hard-chrome plated.

Stem Packing:

Self adjusting, Spring loaded, PTFE packing.

Plug and Seat:

St. St. 304 or 316.

Seating :

Soft seated PTFE backed by EPDM. Optional-VITON/EPDM, Buna Nitrile.

Leakage :

Soft seated Class VI, as per ANSI B16. 104-1976.

Characteristic :

On-Off, normally close and normally open.

Working Fluid Press.:

8 Bar.

Working Temperature :

On Steam-continuous 155°C, Intermittent 180°C, with PTFE seating Buna Nitrile 80°C, EPDM 135°C, VITON 180°C.

Actuator :

Stainless Steel ASTMA351 (CF8).

Cylinder Flange:

Stainless Steel ASTMA351 (CF8).

Piston :

Steel (Forming).

Piston Packing:

Buna Nitrile.

Actuator Spring :

IS 4454 Grade III, duly painted.

Actuator Working Pressure:

3.5 to 6 Bar (refer to graph) (Signal Pressure) inlet pressure depended.

Operating cycles :

Upto 50 mm 300 cy/hr, (Tested on air, on other fluids this figure may vary).

Life Expectancy:

Over one million cycles

Air Quality:

Lubricated, filtered and free of moisture shop air or dry instrument quality air.

Accessories :

Air lock, Indicating limit switch box, Solenoid valves, Filter regulator gauge. Other accessories available on application.

Sales Point :

Full ported flanged valve to give maximum flow, long life, simple in construction.

Application :

For control of air, water, oil, gas, steam in textile, power generator, paper and pulp, chemical, air dryers PSA nitrogen system, air and air dryers, gas generator and others.

Back Pressure:

Suitable upto 2.5 bar.