Pramp Automation and Calibration
Category: Valves
Product: Angle Seated Valve
Sub Product: Normally Closed
Plastic-Piston Actuator
2/2-Way Angled Metal Body Valve with Engineering Plastic-Piston Actuator. For On-Off Application (Rust Free Design), Normally Closed Type.6812M For Flow Over The Seat, 6824M For Flow Under The Seat
|
Size: |
15mm (1/2” ) to 50mm (3”). |
|
Construction: |
6812M-NC-Flow over the seat. 6824M-NC-Flow under the seat. |
|
Body & Bonnet Material: |
Standard-Investment casted SS-ASTM A351 CF8 (DIN1.4301). Optional-Investment casted SS-ASTM A351CF8M (DIN1.4408)(GX6 Cr.Ni MO1810) |
|
Pressure Temp. rating : |
As per ANSI Class 300. |
|
End Connection : |
Standard- BSP(F), Optional- NPT(F)[1], Socket weld[2], Flange end[5], Spigot end [6],TC end[7]. |
|
Seating : |
Standard-Soft seat PTFE backed by EPDM. Optional-VITON/EPDM/Buna Nitrile. |
|
Leakage : |
As per ANSI B16.104-1976 PTFE seating class IV Drop Tight/Bubble Tight. |
|
Trim: |
Standard-SS AISI 304,Optional-SS AISI 316. |
|
Stem Packing: |
Self adjusting, Spring loaded PTFE packing. |
|
Characteristic : |
On-Off, Normally Closed. |
|
Working Temperature : |
On steam-continuous 155°C, Intermittent 180°C, EPDM 135°C, VITON 180°C. |
|
Cylinder, Cover, Body & Piston: |
Glass filled polyamide. |
|
Piston Packing: |
Buna Nitrile. |
|
Actuator Spring : |
IS 4454 Grade III, duly painted. |
|
Pilot Pressure : |
3.5 to 6 bar |
|
Solenoid Mounting : |
Valve has built in Namur mounting interface, any standard Namur Solenoid Valve can be fitted |
|
Operating Cycles per hour: |
15mm, 20mm, 25mm upto 600 cy/hr., 35mm and 50mm upto 300 cy/hr.(tested on air, on other fluids this figure may vary). |
|
Air Quality: |
Lubricated/Non-lubricated. |
|
Accessories : |
Air lock, position indicating limit switch box, solenoid valve, filter regulator gauge. Other accessories available on application. |
|
Application : |
For control of air, water, oil, gas, steam in textile, power generation, paper & pulp, chemical, petrochemical industries, PSA nitrogen system, air dryer, gas generator and others. |
|
Back Pressure: |
Generally all models are suitable for back pressure upto 2.5 bar. |
