Pramp Automation and Calibration
Category: Flow
Product: Turbine Flow Meter
EUTURB consists of a multiple-bladed rotor mounted in a pipe, perpendicular to liquid flow. Liquid flows through the pipe causing a rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. Pulses are counted & 4-20 mA gets generated with the use of converter.
Operating Conditions
|
Application |
Water, Diesel, Gasoline, Oil etc. |
|
Meter size |
DN 4 to DN500 |
|
Flow |
0.04 - 0.25 to 400 - 4000 m3/h |
|
Ambient Temperature |
-20 to +60 deg C. |
|
Fluid Temperature |
-20 to +120 deg C. |
|
Operating Pressure |
for threading connection - 16 bar to 400 bar / for flange connection - as per flange rating |
Performance
|
Repeatability |
±0.2% |
|
Accuracy Standard |
±1% of reading |
Wetted Components
|
Body |
Standard SS304 (optional SS316) |
|
Bearings and Shaft |
Tungsten Carbide |
|
Rotor |
Standard - 2Cr13 Stainless Steel (optional Alloy CD4Mcu) |
|
Retaining Rings |
SS316 |
Power supply, Protection
|
Power Supply |
24 VDC / Battery operated |
|
Flow, Totaliser display |
optional |
|
Transmitter |
4 to 20 mA DC current signal |
|
Housing |
non ex. Proof / ex. proof |
|
Protection |
IP65 |
