Pramp Automation and Calibration
Category: Flow
Product: Sight Flow Indicator
Full View Type
Full View Sight Flow Indicators are assembled with tubular Borosilicate glass. These indicators are simple in construction and used for checking flow from any direction where various values or pump might have to be operated based on the flow in the line. These are recommended where there is no mechanical strain in the pipe line. Inside diameter of the glass tube is as large as or larger than the nominal size of the flow indicators. It is designed for only a negligible pressure drop.
Flapper Type
Flapper Type Sight Flow Indicators are recommended for horizontal and vertical pipeline with upward flow. These units are best suited transparent or slightly opaque solutions and are used for gases also. Position of the flapper indicates flow. One important use of these flow indicators is, in pipe lines where a downstream value may remain closed and even through the flow indicator remains full, there may not be any flow. In such cases, the flapper position alone can indicate where there is flow or not.
Drip Type
Drip Type Sight Flow Indicators are best adapted to vertical downward flow. These models are particularly useful in distillation and similar apparatus where flow is apt to be intermittent. They are designed without any obstruction to handle the intermittent flow as.
Rotary Type
Rotary Type Sight Flow Indicators are with rotating wheel are suitable for installation in any position, but are particularly adapted to pipe lines carrying dark opaque solutions, where the motion of the wheel is easily detected. This model is equally adapted to transparent solutions and gases. It is frequently installed where observations must be made from a distance
Ball Type
Ball type flow indicator is ideal for use in either air or fluid flow applications. The absence of wear components assures high reliability in installations unsuitable for indicators using bearings with a rotating wheel or turbine. The indicator is easily seen from elevated positions. The domed sight glass allows full 360° visibility from above. The ball is easily seen from even large.
Standard Material Specifications
Body |
ASTM A216 GR WCB, ASTM A 351 GR Cf8, ASTM A 351 CF8M, Brass, Cast Iron, Gun Metal |
Covers |
ASTM A216 WCB, ASTM A 351 GR CF8, ASTM A 351 CF8M, Brass, Cast Iron, Gun Metal |
Flanges |
ASTM A216 GR WCB, ASTM A 351 GR CF8,ASTM A 351 CF8M, Brass, Cast Iron, Gun Metal |
Glass |
Toughened |
Gasket |
Compressed Asbestos, Neoprene, Nitrile, Teflon, Viton |
Rotor |
Nylon, Teflon, Polyropelene |
Rotor Holder |
SS 316 |
Flapper |
SS 316 |
Bolts |
High Tensile, Mild Steel, SS 304, SS 316 |
Connections |
Screwed: NPT, B.S.P., Flanged: B.S.10, Table 'E', 'D', 'F', ASA 150#, DIN., etc. |